Steeltoe Stream RabbitMQ Binder Reference Guide
This guide describes the RabbitMQ implementation of the Steeltoe Stream Binder, along with usage and configuration options, as well as information on how the Stream concepts map into RabbitMQ-specific constructs.
Usage
To use the RabbitMQ binder, add it to your Stream application with a PackageReference in your .csproj as seen in this example:
<PackageReference Include="Steeltoe.Stream.Binder.RabbitMQ" Version="3.2.0" />
RabbitMQ Binder Overview
The following simplified diagram shows how the RabbitMQ binder operates:
By default, the RabbitMQ Binder implementation maps each destination to a TopicExchange.
For each consumer group, a Queue is bound to that TopicExchange.
Each consumer instance has a corresponding RabbitMQ Consumer instance for its group's Queue.
For partitioned producers and consumers, the queues are suffixed with the partition index and use the partition index as the routing key.
For anonymous consumers (those with no group property), an auto-delete queue (with a randomized unique name) is used.
By using the optional autoBindDlq option, you can configure the binder to create and configure dead-letter queues (DLQs) (and a dead-letter exchange DLX, as well as routing infrastructure).
By default, the dead letter queue has the name of the destination, appended with .dlq.
If retry is enabled (i.e. maxAttempts > 1), failed messages are delivered to the DLQ after retries are exhausted.
If retry is disabled (i.e. maxAttempts = 1), you should set requeueRejected to False, the default, so that failed messages are routed to the DLQ, instead of being re-queued.
In addition, republishToDlq causes the binder to publish a failed message to the DLQ (instead of rejecting it).
This feature lets additional information, such as the stack trace in the x-exception-stacktrace header, be added to the message in headers.
See the frameMaxHeadroom setting below for information about truncated stack traces.
This option does not require retry to be enabled.
You can republish a failed message after just one attempt and you can configure the delivery mode of republished messages.
See the republishDeliveryMode setting below.
If a stream listener throws an ImmediateAcknowledgeAmqpException, the DLQ is bypassed and the message simply discarded. This is true regardless of the setting of republishToDlq.
IMPORTANT: Setting
requeueRejectedtoTrue(withrepublishToDlq=False) causes the message to be re-queued and redelivered continually, which is likely not what you want unless the reason for the failure is transient. In general, you should enable retry within the binder by settingmaxAttemptsto greater than one or by settingrepublishToDlqtoTrue.
See RabbitMQ Binder Settings for more information about configuring these settings.
The framework does not provide any standard mechanism to consume dead-letter messages (or to re-route them back to the primary queue). Some options are described in Dead-Letter Queue Processing.
The RabbitMessageChannelBinder sets the RabbitTemplate.userPublisherConnection property to True so that the non-transactional producers avoid deadlocks on consumers, which can happen if cached connections are blocked because of a memory alarm on the broker.
NOTE: Currently, a
multiplexconsumer (a single consumer listening to multiple queues) is only supported for message-driven consumers; polled consumers can only retrieve messages from a single queue.
Configuration Settings
This section contains settings specific to the RabbitMQ Binder and associated channels.
For general binding configuration options and properties, see the Steeltoe Stream Reference Documentation.
RabbitMQ Binder Settings
By default, the RabbitMQ binder uses the Steeltoe RabbitMQ ConnectionFactory.
Consequently, it supports all of the associated configuration settings for RabbitMQ.
For reference, see the Steeltoe RabbitMQ Documentation.
RabbitMQ configuration settings use the spring:rabbitmq prefix.
In addition to the RabbitMQ settings, the RabbitMQ binder supports the following configuration values. All settings should be prefixed with spring:cloud:stream:rabbitmq:binder.
adminAddresses
A comma-separated list of RabbitMQ management plugin URLs.
Only used when nodes contains more than one entry.
Each entry in this list must have a corresponding entry in spring:rabbitmq:addresses.
Only needed if you use a RabbitMQ cluster and wish to consume from the node that hosts the queue.
See Queue Affinity and the LocalizedQueueConnectionFactory for more information.
Default: empty.
nodes
A comma-separated list of RabbitMQ node names.
When more than one entry, used to locate the server address where a queue is located.
Each entry in this list must have a corresponding entry in spring:rabbitmq:addresses.
Only needed if you use a RabbitMQ cluster and wish to consume from the node that hosts the queue.
See Queue Affinity and the LocalizedQueueConnectionFactory for more information.
Default: empty.
compressionLevel
The compression level for compressed bindings.
See System.IO.Compression.CompressionLevel.
Default: 1 (CompressionLevel.Fastest).
connectionNamePrefix
A connection name prefix used to name the connection(s) created by this binder.
The name is this prefix followed by #n, where n increments each time a new connection is opened.
Default: none
RabbitMQ Consumer Settings
The following properties are available for Rabbit consumers only and must be prefixed with spring:cloud:stream:rabbitmq:bindings:<channelName>:consumer..
NOTE: To avoid repetition, Stream supports setting values for all channels, in the format of
spring:cloud:stream:default:<setting>=<value>.
acknowledgeMode The acknowledge mode.
Default: AUTO.
anonymousGroupPrefix
When the binding has no group setting, an anonymous, auto-delete queue is bound to the destination exchange.
The default naming strategy for such queues results in a queue named anonymous.<base64 representation of a UUID>.
Set this property to change the prefix to something other than the default.
Default: anonymous..
autoBindDlq Whether to automatically declare the DLQ and bind it to the binder DLX.
Default: False.
bindingRoutingKey
The routing key with which to bind the queue to the exchange (if bindQueue is True).
For partitioned destinations, -<instanceIndex> is appended.
Default: #.
bindQueue
Whether to declare the queue and bind it to the destination exchange.
Set it to False if you have set up your own infrastructure and have previously created and bound the queue.
Default: True.
consumerTagPrefix
Used to create the consumer tag(s); will be appended by #n where n increments for each consumer created.
Example: ${spring:application:name}-${spring:cloud:stream:bindings:input:group}-${spring:cloud:stream:instanceIndex}.
Default: none - the broker will generate random consumer tags.
deadLetterQueueName The name of the DLQ
Default: prefix+destination.dlq
deadLetterExchange
A DLX to assign to the queue.
Relevant only if autoBindDlq is True.
Default: prefix+DLX
deadLetterExchangeType
The type of the DLX to assign to the queue.
Relevant only if autoBindDlq is True.
Default: direct
deadLetterRoutingKey
A dead letter routing key to assign to the queue.
Relevant only if autoBindDlq is True.
Default: destination
declareDlx
Whether to declare the dead letter exchange for the destination.
Relevant only if autoBindDlq is True.
Set to False if you have a pre-configured DLX.
Default: True.
declareExchange Whether to declare the exchange for the destination.
Default: True.
delayedExchange
Whether to declare the exchange as a Delayed Message Exchange.
Requires the delayed message exchange plugin on the broker.
The x-delayed-type argument is set to the exchangeType.
Default: False.
dlqDeadLetterExchange If a DLQ is declared, a DLX to assign to that queue.
Default: none
dlqDeadLetterRoutingKey If a DLQ is declared, a dead letter routing key to assign to that queue.
Default: none
dlqExpires How long before an unused dead letter queue is deleted (in milliseconds).
Default: no expiration
dlqLazy
Declare the dead letter queue with the x-queue-mode=lazy argument.
See Lazy Queues.
Consider using a policy instead of this setting, because using a policy allows changing the setting without deleting the queue.
Default: False.
dlqMaxLength Maximum number of messages in the dead letter queue.
Default: no limit
dlqMaxLengthBytes Maximum number of total bytes in the dead letter queue from all messages.
Default: no limit
dlqMaxPriority Maximum priority of messages in the dead letter queue (0-255).
Default: none
dlqOverflowBehavior
Action to take when dlqMaxLength or dlqMaxLengthBytes is exceeded; currently drop-head or reject-publish but refer to the RabbitMQ documentation.
Default: none
dlqTtl Default time to live to apply to the dead letter queue when declared (in milliseconds).
Default: no limit
durableSubscription
Whether the subscription should be durable.
Only effective if group is also set.
Default: True.
exchangeAutoDelete
If declareExchange is True, the exchange should be auto-deleted (i.e. removed after the last queue is removed).
Default: True.
exchangeDurable
If declareExchange is True, the exchange should be durable (i.e. it survives broker restart).
Default: True.
exchangeType
The exchange type: direct, fanout or topic for non-partitioned destinations and direct or topic for partitioned destinations.
Default: topic.
exclusive
Whether to create an exclusive consumer.
Concurrency should be 1 when this is True.
Often used when strict ordering is required but enabling a hot standby instance to take over after a failure.
See recoveryInterval, which controls how often a standby instance attempts to consume.
Default: False.
expires How long before an unused queue is deleted (in milliseconds).
Default: no expiration
failedDeclarationRetryInterval The interval, in milliseconds, between attempts to consume from a queue if it is missing.
Default: 5000
frameMaxHeadroom
The number of bytes to reserve for other headers when adding the stack trace to a DLQ message header.
All headers must fit within the frame_max size configured on the broker.
Stack traces can be large; if the size plus this property exceeds frame_max then the stack trace will be truncated.
A WARN log will be written; consider increasing the frame_max or reducing the stack trace by catching the exception and throwing one with a smaller stack trace.
Default: 20000
headerPatterns Patterns for headers to be mapped from inbound messages.
Default: ['*'] (all headers).
lazy
Declare the queue with the x-queue-mode=lazy argument.
See Lazy Queues.
Consider using a policy instead of this setting, because using a policy allows changing the setting without deleting the queue.
Default: False.
maxConcurrency
The maximum number of consumers.
Not supported when the containerType is direct.
Default: 1.
maxLength The maximum number of messages in the queue.
Default: no limit
maxLengthBytes The maximum number of total bytes in the queue from all messages.
Default: no limit
maxPriority The maximum priority of messages in the queue (0-255).
Default: none
missingQueuesFatal
When the queue cannot be found, whether to treat the condition as fatal and stop the listener container.
Defaults to False so that the container keeps trying to consume from the queue -- for example, when using a cluster and the node hosting a non-HA queue is down.
Default: False
overflowBehavior
Action to take when maxLength or maxLengthBytes is exceeded; currently drop-head or reject-publish but refer to the RabbitMQ documentation.
Default: none
prefetch Prefetch count.
Default: 1.
prefix
A prefix to be added to the name of the destination and queues.
Default: "".
queueDeclarationRetries
The number of times to retry consuming from a queue if it is missing.
Relevant only when missingQueuesFatal is True.
Otherwise, the container keeps retrying indefinitely.
Not supported when the containerType is direct.
Default: 3
queueNameGroupOnly
When True, consume from a queue with a name equal to the group.
Otherwise the queue name is destination.group.
This is useful, for example, when using Steeltoe Stream to consume from an existing RabbitMQ queue.
Default: False.
recoveryInterval The interval between connection recovery attempts, in milliseconds.
Default: 5000.
requeueRejected
Whether delivery failures should be re-queued when retry is disabled or republishToDlq is False.
Default: False.
republishDeliveryMode
When republishToDlq is True, specifies the delivery mode of the republished message.
Default: MessageDeliveryMode.PERSISTENT
republishToDlq
By default, messages that fail after retries are exhausted are rejected.
If a dead-letter queue (DLQ) is configured, RabbitMQ routes the failed message (unchanged) to the DLQ.
If set to True, the binder republishes failed messages to the DLQ with additional headers, including the exception message and stack trace from the cause of the final failure.
Also see the frameMaxHeadroom setting above.
Default: False
transacted Whether to use transacted channels.
Default: False.
ttl Default time to live to apply to the queue when declared (in milliseconds).
Default: no limit
Rabbit Producer Settings
The following settings are available for RabbitMQ producers only and must be prefixed with spring:cloud:stream:rabbitmq:bindings:<channelName>:producer..
NOTE: To avoid repetition, Steeltoe Stream supports setting values for all channels, in the format of
spring:cloud:stream:default:<setting>=<value>.
autoBindDlq Whether to automatically declare the DLQ and bind it to the binder DLX.
Default: False.
batchingEnabled
Whether to enable message batching by producers.
Messages are batched into one message according to the following properties (described in the next three entries in this list): batchSize, batchBufferLimit, and batchTimeout.
Default: False.
batchSize The number of messages to buffer when batching is enabled.
Default: 100.
batchBufferLimit The maximum buffer size when batching is enabled.
Default: 10000.
batchTimeout The batch timeout when batching is enabled.
Default: 5000.
bindingRoutingKey
The routing key with which to bind the queue to the exchange (if bindQueue is True).
Only applies to non-partitioned destinations.
Only applies if requiredGroups are provided and then only to those groups.
Default: #.
bindQueue
Whether to declare the queue and bind it to the destination exchange.
Set it to False if you have set up your own infrastructure and have previously created and bound the queue.
Only applies if requiredGroups are provided and then only to those groups.
Default: True.
compress Whether data should be compressed when sent.
Default: False.
confirmAckChannel
When errorChannelEnabled is True, a channel to which to send positive delivery acknowledgments (aka publisher confirms).
If the channel does not exist, a DirectChannel is registered with this name.
The connection factory must be configured to enable publisher confirms.
Default: nullChannel (acks are discarded).
deadLetterQueueName
The name of the DLQ
Only applies if requiredGroups are provided and then only to those groups.
Default: prefix+destination.dlq
deadLetterExchange
A DLX to assign to the queue.
Relevant only when autoBindDlq is True.
Applies only when requiredGroups are provided and then only to those groups.
Default: prefix+DLX
deadLetterExchangeType
The type of the DLX to assign to the queue.
Relevant only if autoBindDlq is True.
Applies only when requiredGroups are provided and then only to those groups.
Default: direct
deadLetterRoutingKey
A dead letter routing key to assign to the queue.
Relevant only when autoBindDlq is True.
Applies only when requiredGroups are provided and then only to those groups.
Default: destination
declareDlx
Whether to declare the dead letter exchange for the destination.
Relevant only if autoBindDlq is True.
Set to False if you have a pre-configured DLX.
Applies only when requiredGroups are provided and then only to those groups.
Default: True.
declareExchange Whether to declare the exchange for the destination.
Default: True.
delayExpression
An expression to evaluate the delay to apply to the message (x-delay header).
It has no effect if the exchange is not a delayed message exchange.
Default: No x-delay header is set.
delayedExchange
Whether to declare the exchange as a Delayed Message Exchange.
Requires the delayed message exchange plugin on the broker.
The x-delayed-type argument is set to the exchangeType.
Default: False.
deliveryMode The delivery mode.
Default: PERSISTENT.
dlqDeadLetterExchange
When a DLQ is declared, a DLX to assign to that queue.
Applies only if requiredGroups are provided and then only to those groups.
Default: none
dlqDeadLetterRoutingKey
When a DLQ is declared, a dead letter routing key to assign to that queue.
Applies only when requiredGroups are provided and then only to those groups.
Default: none
dlqExpires
How long (in milliseconds) before an unused dead letter queue is deleted.
Applies only when requiredGroups are provided and then only to those groups.
Default: no expiration
dlqLazy
Declare the dead letter queue with the x-queue-mode=lazy argument.
See Lazy Queues.
Consider using a policy instead of this setting, because using a policy allows changing the setting without deleting the queue.
Applies only when requiredGroups are provided and then only to those groups.
dlqMaxLength
Maximum number of messages in the dead letter queue.
Applies only if requiredGroups are provided and then only to those groups.
Default: no limit
dlqMaxLengthBytes
Maximum number of total bytes in the dead letter queue from all messages.
Applies only when requiredGroups are provided and then only to those groups.
Default: no limit
dlqMaxPriority
Maximum priority of messages in the dead letter queue (0-255)
Applies only when requiredGroups are provided and then only to those groups.
Default: none
dlqTtl
Default time (in milliseconds) to live to apply to the dead letter queue when declared.
Applies only when requiredGroups are provided and then only to those groups.
Default: no limit
exchangeAutoDelete
If declareExchange is True, whether the exchange should be auto-delete (it is removed after the last queue is removed).
Default: True.
exchangeDurable
If declareExchange is True, whether the exchange should be durable (survives broker restart).
Default: True.
exchangeType
The exchange type: direct, fanout or topic for non-partitioned destinations and direct or topic for partitioned destinations.
Default: topic.
expires
How long (in milliseconds) before an unused queue is deleted.
Applies only when requiredGroups are provided and then only to those groups.
Default: no expiration
headerPatterns Patterns for headers to be mapped to outbound messages.
Default: ['*'] (all headers).
lazy
Declare the queue with the x-queue-mode=lazy argument.
See Lazy Queues.
Consider using a policy instead of this setting, because using a policy allows changing the setting without deleting the queue.
Applies only when requiredGroups are provided and then only to those groups.
Default: False.
maxLength
Maximum number of messages in the queue.
Applies only when requiredGroups are provided and then only to those groups.
Default: no limit
maxLengthBytes
Maximum number of total bytes in the queue from all messages.
Only applies if requiredGroups are provided and then only to those groups.
Default: no limit
maxPriority
Maximum priority of messages in the queue (0-255).
Only applies if requiredGroups are provided and then only to those groups.
Default: none
prefix
A prefix to be added to the name of the destination exchange.
Default: "".
queueNameGroupOnly
When True, consume from a queue with a name equal to the group.
Otherwise the queue name is destination.group.
This is useful, for example, when using Steeltoe Stream to consume from an existing RabbitMQ queue.
Applies only when requiredGroups are provided and then only to those groups.
Default: False.
routingKeyExpression
A expression to determine the routing key to use when publishing messages.
For a fixed routing key, use a literal expression, such as routingKeyExpression='my.routingKey' in a properties file or routingKeyExpression: '''my.routingKey''' in a YAML file.
Default: destination or destination-<partition> for partitioned destinations.
transacted Whether to use transacted channels.
Default: False.
ttl
Default time, in milliseconds, to live to apply to the queue when declared.
Applies only when requiredGroups are provided and then only to those groups.
Default: no limit
NOTE: In the case of RabbitMQ, content type headers can be set by external applications.
Using Existing Queues/Exchanges
By default, the binder will automatically provision a topic exchange with the name being derived from the value of the destination binding property <prefix><destination>.
The destination defaults to the binding name, if not provided.
When binding a consumer, a queue will automatically be provisioned with the name <prefix><destination>.<group> (if a group binding setting is specified), or an anonymous, auto-delete queue when there is no group.
The queue will be bound to the exchange with the "match-all" wildcard routing key (#) for a non-partitioned binding or <destination>-<instanceIndex> for a partitioned binding.
The prefix is an empty string by default.
If an output binding is specified with requiredGroups, a queue/binding will be provisioned for each group.
There are a number of rabbitmq specific binding settings that allow you to modify this default behavior.
If you have an existing exchange/queue that you wish to use, you can completely disable automatic provisioning as follows, assuming the exchange is named myExchange and the queue is named myQueue:
spring:cloud:stream:binding:<binding name>:destination=myExhangespring:cloud:stream:binding:<binding name>:group=myQueuespring:cloud:stream:rabbit:bindings:<binding name>:consumer:bindQueue=Falsespring:cloud:stream:rabbit:bindings:<binding name>:consumer:declareExchange=Falsespring:cloud:stream:rabbit:bindings:<binding name>:consumer:queueNameGroupOnly=True
If you want the binder to provision the queue/exchange, but you want to do it using something other than the defaults discussed here, use the following settings. Refer to the documentation above for more information.
spring:cloud:stream:rabbit:bindings:<binding name>:consumer:bindingRoutingKey=myRoutingKeyspring:cloud:stream:rabbit:bindings:<binding name>:consumer:exchangeType=<type>spring:cloud:stream:rabbit:bindings:<binding name>:producer:routingKeyExpression='myRoutingKey'
There are similar settings used when declaring a dead-letter exchange/queue, when autoBindDlq is True.
Retry With the RabbitMQ Binder
When retry is enabled within the binder, the listener container thread is suspended for any back off periods that are configured.
This might be important when strict ordering is required with a single consumer. However, for other use cases, it prevents other messages from being processed on that thread.
An alternative to using binder retry is to set up dead lettering with time to live on the dead-letter queue (DLQ) as well as dead-letter configuration on the DLQ itself.
See RabbitMQ Binder Settings for more information about the settings discussed here.
You can use the following example configuration to enable this feature:
- Set
autoBindDlqtoTrue. The binder creates a DLQ. Optionally, you can specify a name indeadLetterQueueName. - Set
dlqTtlto the back off time you want to wait between redeliveries. - Set the
dlqDeadLetterExchangeto the default exchange.
Expired messages from the DLQ are routed to the original queue, because the default deadLetterRoutingKey is the queue name (destination.group).
Setting to the default exchange is achieved by setting the property with no value, as shown in the next example.
To force a message to be dead-lettered, either throw an AmqpRejectAndDontRequeueException or set requeueRejected to True (the default) and throw any exception.
The loop continue without end, which is fine for transient problems, but you may want to give up after some number of attempts.
Fortunately, RabbitMQ provides the x-death header, which lets you determine how many cycles have occurred.
To acknowledge a message after giving up, throw an ImmediateAcknowledgeAmqpException.
Putting it All Together
The following configuration creates an exchange myDestination with queue myDestination.consumerGroup bound to a topic exchange with a wildcard routing key #:
"spring": {
"cloud": {
"stream": {
"binder": "rabbit",
"bindings": {
"input": {
"destination": "myDestination",
"group": "consumerGroup",
"consumer": {
"maxAttempts": 1
}
}
},
"rabbit": {
"bindings": {
"input": {
"consumer": {
"autoBindDlq": true,
"dlqTtl": 5000,
"dlqDeadLetterExchange": ""
}
}
}
}
}
}
}
This configuration creates a DLQ bound to a direct exchange (DLX) with a routing key of myDestination.consumerGroup.
When messages are rejected, they are routed to the DLQ.
After 5 seconds, the message expires and is routed to the original queue by using the queue name as the routing key, as shown in the following example:
[EnableBinding(typeof(ISink))]
public class Program
{
static async Task Main(string[] args)
{
var host = await StreamHost.CreateDefaultBuilder<Program>(args)
.StartAsync();
}
[StreamListener(ISink.INPUT)]
public void Listen(string input,
[Header(Name ="x-death", Required = false)]
IDictionary<string, object> death)
{
if (death != null && (long)death["count"] == 3L)
{
// giving up - don't send to DLX
throw new ImmediateAcknowledgeException("Failed after 4 attempts");
}
throw new RabbitRejectAndDontRequeueException("failed");
}
}
Notice that the count property in the x-death header is a long.
Error Channels
The binder unconditionally sends exceptions to an error channel for each consumer destination and can also be configured to send async producer send failures to an error channel. See Error Handling for more information.
RabbitMQ has two types of send failures:
- Returned messages
- Negatively acknowledged Publisher Confirms.
The latter is rare. According to the RabbitMQ documentation "[A nack] will only be delivered if an internal error occurs in the Erlang process responsible for a queue.".
As well as enabling producer error channels (as described in Error Handling), the RabbitMQ binder only sends messages to the channels if the connection factory is appropriately configured, as follows. For the RabbitMQ set the following configuration settings:
spring:rabbitmq:publisherConfirms=Truespring:rabbitmq:publisherReturns=True
The payload of the ErrorMessage for a returned message is a RabbitReturnedMessageException with the following properties:
ReturnedMessage: The messagingIMessagethat failed to be sent.ReplyCode: An integer value indicating the reason for the failure (for example, 312 - No route).ReplyText: A text value indicating the reason for the failure (for example,NO_ROUTE).Exchange: The exchange to which the message was published.RoutingKey: The routing key used when the message was published.
For negatively acknowledged confirmations, the payload is a NackedRabbitMessageException with the following properties:
FailedMessage: The messaging `IMessage that failed to be sent.NackReason: A reason (if available -- you may need to examine the broker logs for more information).
There is no automatic handling of these exceptions (such as sending to a dead-letter queue). You can consume these exceptions with your own Spring Integration flow.
Dead-Letter Queue Processing
Because you cannot anticipate how users would want to dispose of dead-lettered messages, the framework does not provide any standard mechanism to handle them.
If the reason for the dead-lettering is transient, you may wish to route the messages back to the original queue.
However, if the problem is a permanent issue, that could cause an infinite loop.
The following application shows an example of how to route those messages back to the original queue but moves them to a third "parking lot" queue after three attempts.
The second example uses the RabbitMQ Delayed Message Exchange to introduce a delay to the re-queued message.
In this example, the delay increases for each attempt.
These examples use a @RabbitListener to receive messages from the DLQ.
You could also use RabbitTemplate.receive() in a batch process.
The examples assume the original destination is so8400in and the consumer group is so8400.
Non-Partitioned Destinations
The first two examples are for when the destination is not partitioned:
public class Program
{
private const string ORIGINAL_QUEUE = "so8400in.so8400";
private const string DLQ = ORIGINAL_QUEUE + ".dlq";
private const string PARKING_LOT = ORIGINAL_QUEUE + ".parkingLot";
private const string X_RETRIES_HEADER = "x-retries";
static async Task Main(string[] args)
{
var host = StreamHost
.CreateDefaultBuilder<ReRouteDlq>(args)
.ConfigureServices((ctx, services) =>
{
services.AddRabbitServices();
services.AddRabbitTemplate();
services.AddRabbitListeners<ReRouteDlq>();
})
.Build();
await host.StartAsync();
}
[EnableBinding(typeof(ISink))]
public class ReRouteDlq
{
private readonly RabbitTemplate rabbitTemplate;
public ReRouteDlq(RabbitTemplate template)
{
rabbitTemplate = template;
}
[DeclareQueue(Name = PARKING_LOT)]
[RabbitListener(DLQ)]
public void RePublish(
string text,
[Header(Name = X_RETRIES_HEADER, Required = false)]
int? retriesHeader)
{
var failedMessage = MessageBuilder
.WithPayload(Encoding.UTF8.GetBytes(text))
.SetHeader(X_RETRIES_HEADER, (retriesHeader ?? 0) + 1)
.Build();
if (!retriesHeader.HasValue || retriesHeader < 3)
{
rabbitTemplate.Send(ORIGINAL_QUEUE, failedMessage);
}
else
{
rabbitTemplate.Send(PARKING_LOT, failedMessage);
}
}
[StreamListener(ISink.INPUT)]
public void InitialMessage(IMessage failedMessage)
{
throw new RabbitRejectAndDontRequeueException("failed");
}
}
}
public class Program
{
private const string ORIGINAL_QUEUE = "so8400in.so8400";
private const string DLQ = ORIGINAL_QUEUE + ".dlq";
private const string PARKING_LOT = ORIGINAL_QUEUE + ".parkingLot";
private const string X_RETRIES_HEADER = "x-retries";
private const string DELAY_EXCHANGE = "dlqReRouter";
static async Task Main(string[] args)
{
var host = StreamHost
.CreateDefaultBuilder<ReRouteDlq>(args)
.ConfigureServices((ctx, services) =>
{
services.AddRabbitServices();
services.AddRabbitTemplate();
services.AddRabbitListeners<ReRouteDlq>();
})
.Build();
await host.StartAsync();
}
[EnableBinding(typeof(ISink))]
public class ReRouteDlq
{
private readonly RabbitTemplate rabbitTemplate;
public ReRouteDlq(RabbitTemplate template)
{
rabbitTemplate = template;
}
[DeclareQueue(Name = PARKING_LOT)]
[DeclareExchange(Name = "delayExchange", Delayed = "True")]
[DeclareQueueBinding(Name = "bindOriginalToDelay", QueueName = ORIGINAL_QUEUE, ExchangeName = "delayExchange")]
[RabbitListener(DLQ)]
public void RePublish(
string text,
[Header(Name = X_RETRIES_HEADER, Required = false)]
int? retriesHeader)
{
var failedMessage = MessageBuilder
.WithPayload(Encoding.UTF8.GetBytes(text))
.SetHeader(X_RETRIES_HEADER, (retriesHeader ?? 0) + 1)
.SetHeader("x-delay", 5000*retriesHeader)
.Build();
if (!retriesHeader.HasValue || retriesHeader < 3)
{
rabbitTemplate.Send(ORIGINAL_QUEUE, failedMessage);
}
else
{
rabbitTemplate.Send(PARKING_LOT, failedMessage);
}
}
[StreamListener(ISink.INPUT)]
public void InitialMessage(IMessage failedMessage)
{
throw new RabbitRejectAndDontRequeueException("failed");
}
}
}
Partitioned Destinations
With partitioned destinations, there is one DLQ for all partitions. We determine the original queue from the headers.
republishToDlq=False
When republishToDlq is False, RabbitMQ publishes the message to the DLX/DLQ with an x-death header containing information about the original destination, as shown in the following example:
public class Program
{
private const string ORIGINAL_QUEUE = "so8400in.so8400";
private const string DLQ = ORIGINAL_QUEUE + ".dlq";
private const string PARKING_LOT = ORIGINAL_QUEUE + ".parkingLot";
private const string X_DEATH_HEADER = "x-death";
private const string X_RETRIES_HEADER = "x-retries";
static async Task Main(string[] args)
{
var host = StreamHost
.CreateDefaultBuilder<ReRouteDlq>(args)
.ConfigureServices((ctx, services) =>
{
services.AddRabbitServices();
services.AddRabbitTemplate();
services.AddRabbitListeners<ReRouteDlq>();
})
.Build();
await host.StartAsync();
}
[EnableBinding(typeof(ISink))]
public class ReRouteDlq
{
private readonly RabbitTemplate rabbitTemplate;
public ReRouteDlq(RabbitTemplate template)
{
rabbitTemplate = template;
}
[DeclareQueue(Name = PARKING_LOT)]
[RabbitListener(DLQ)]
public void RePublish(
string text,
[Header(Name = X_RETRIES_HEADER, Required = false)]
int? retriesHeader,
[Header(Name = X_DEATH_HEADER, Required = false)]
IDictionary<string, object> xDeathHeader
)
{
var failedMessage = MessageBuilder
.WithPayload(Encoding.UTF8.GetBytes(text))
.SetHeader(X_RETRIES_HEADER, (retriesHeader ?? 0) + 1)
.Build();
if (!retriesHeader.HasValue || retriesHeader < 3)
{
if (xDeathHeader != null
&& xDeathHeader.TryGetValue("exchange", out var exchange)
&& exchange is string strExchange
&& xDeathHeader.TryGetValue("routing-keys", out var rk)
&& rk is List<object> routingKeys)
{
rabbitTemplate.Send(strExchange, routingKeys[0].ToString(), failedMessage);
}
else
{
throw new RabbitRejectAndDontRequeueException("failed");
}
}
else
{
rabbitTemplate.Send(PARKING_LOT, failedMessage);
}
}
[StreamListener(ISink.INPUT)]
public void InitialMessage(IMessage failedMessage)
{
throw new RabbitRejectAndDontRequeueException("failed");
}
}
}
republishToDlq=True
When republishToDlq is True, the republishing recoverer adds the original exchange and routing key to headers, as shown in the following example:
public class Program
{
private const string ORIGINAL_QUEUE = "so8400in.so8400";
private const string DLQ = ORIGINAL_QUEUE + ".dlq";
private const string PARKING_LOT = ORIGINAL_QUEUE + ".parkingLot";
private const string X_RETRIES_HEADER = "x-retries";
private const string X_ORIGINAL_EXCHANGE_HEADER = RepublishMessageRecoverer.X_ORIGINAL_EXCHANGE;
private const string X_ORIGINAL_ROUTING_KEY_HEADER = RepublishMessageRecoverer.X_ORIGINAL_ROUTING_KEY;
static async Task Main(string[] args)
{
var host = StreamHost
.CreateDefaultBuilder<ReRouteDlq>(args)
.ConfigureServices((ctx, services) =>
{
services.AddRabbitServices();
services.AddRabbitTemplate();
services.AddRabbitListeners<ReRouteDlq>();
})
.Build();
await host.StartAsync();
}
[EnableBinding(typeof(ISink))]
public class ReRouteDlq
{
private readonly RabbitTemplate rabbitTemplate;
public ReRouteDlq(RabbitTemplate template)
{
rabbitTemplate = template;
}
[DeclareQueue(Name = PARKING_LOT)]
[RabbitListener(DLQ)]
public void RePublish(
string text,
[Header(Name = X_RETRIES_HEADER, Required = false)]
int? retriesHeader,
[Header(Name = X_ORIGINAL_EXCHANGE_HEADER, Required = false)]
string exchange,
[Header(Name = X_ORIGINAL_ROUTING_KEY_HEADER, Required = false)]
string originalRoutingKey
)
{
var failedMessage = MessageBuilder.WithPayload(Encoding.UTF8.GetBytes(text)).SetHeader(X_RETRIES_HEADER, (retriesHeader ?? 0) + 1).Build();
if (!retriesHeader.HasValue || retriesHeader < 3)
{
if (exchange != null && !string.IsNullOrEmpty(originalRoutingKey) )
{
rabbitTemplate.Send(exchange, originalRoutingKey, failedMessage);
}
else
{
rabbitTemplate.Send(ORIGINAL_QUEUE, failedMessage);
}
}
else
{
rabbitTemplate.Send(PARKING_LOT, failedMessage);
}
}
[StreamListener(ISink.INPUT)]
public void InitialMessage(IMessage failedMessage)
{
throw new RabbitRejectAndDontRequeueException("failed");
}
}
}
Partitioning with the RabbitMQ Binder
RabbitMQ does not support partitioning natively.
Sometimes, it is advantageous to send data to specific partitions -- for example, when you want to strictly order message processing, all messages for a particular customer should go to the same partition.
The RabbitMessageChannelBinder provides partitioning by binding a queue for each partition to the destination exchange.
The following C# and JSON configuration examples show how to configure the producer:
[EnableBinding(typeof(ISource))]
public class RabbitPartitionProducerApplication
{
static async Task Main(string[] args)
{
var host = StreamHost
.CreateDefaultBuilder<RabbitPartitionProducerApplication>(args)
.ConfigureServices(svc => svc.AddHostedService<Worker>())
.Build();
await host.StartAsync();
}
}
public class Worker : BackgroundService
{
private readonly ISource _source;
private readonly ILogger<Worker> _logger;
private static readonly Random RANDOM = new Random();
private static readonly string[] data = new string[] {
"abc1", "def1", "qux1",
"abc2", "def2", "qux2",
"abc3", "def3", "qux3",
"abc4", "def4", "qux4",
};
public string ServiceName { get; set; } = "BackgroundWorker";
public Worker(ISource source, ILogger<Worker> logger)
{
_source = source;
_logger = logger;
}
protected override async Task ExecuteAsync(CancellationToken stoppingToken)
{
await Task.Delay(5000, stoppingToken); // Wait for the Infrastructure to be setup correctly;
while (!stoppingToken.IsCancellationRequested)
{
_logger.LogInformation("Worker running at: {time}", DateTimeOffset.Now);
try
{
var message = Generate();
_source.Output.Send(message);
}
catch(Exception ex)
{
_logger.LogError(ex, ex.Message);
}
await Task.Delay(5000, stoppingToken);
}
}
protected virtual IMessage Generate()
{
var value = data[RANDOM.Next(data.Length)];
Console.WriteLine("Sending: " + value);
return MessageBuilder.WithPayload(value).SetHeader("partitionKey", value).Build();
}
}
{
"spring": {
"cloud": {
"stream": {
"binder": "rabbit",
"bindings": {
"output": {
"destination": "partitioned.destination",
"producer": {
"partitioned": true,
"partitionKeyExpression": "Headers['partitionKey']",
"partitionCount": 2,
"requiredGroups": [ "myGroup" ]
}
}
}
}
}
}
}
NOTE: The configuration in the preceding example uses the default partitioning (
key.GetHashCode() % partitionCount).
This may or may not provide a suitably balanced algorithm, depending on the key values.
You can override this default by using the partitionSelectorExpression.
The requiredGroups setting is required only if you need the consumer queues to be provisioned when the producer is deployed.
Otherwise, any messages sent to a partition are lost until the corresponding consumer is deployed.
The following configuration provisions a topic exchange:
The following queues are bound to that exchange:
The following bindings associate the queues to the exchange:
The following C# and JSON configuration example continue the previous example and show how to configure the consumer:
[EnableBinding(typeof(ISink))]
public class PartitionedConsumer
{
static async Task Main(string[] args)
{
var host = StreamHost
.CreateDefaultBuilder<PartitionedConsumer>(args)
.Build();
await host.StartAsync();
}
[StreamListener(ISink.INPUT)]
public void Listen([Payload] string input, [Header(RabbitMessageHeaders.CONSUMER_QUEUE)] string queue)
{
Console.WriteLine(input +" received from queue " + queue);
}
}
{
"spring": {
"cloud": {
"stream": {
"bindings": {
"input": {
"destination" : "partitioned.destination",
"group": "myGroup",
"consumer": {
"partitioned": true,
"instanceIndex": 0
}
}
}
}
}
}
}
IMPORTANT: The
RabbitMessageChannelBinderdoes not support dynamic scaling. There must be at least one consumer per partition. The consumer'sinstanceIndexis used to indicate which partition is consumed. Platforms such as Cloud Foundry can have only one instance with aninstanceIndex.